Specifications:
- RMS Power (4 ohms): 90 watts x 4 chan.
- RMS Power (2 ohms): 180 watts x 4 chan.
- RMS Power (1 ohm): Not Stable
- Bridged RMS Power: 360 watts x 2 chan.
- Peak Power Output: 1440 watts approx.
- Min. Impedance Unbridged: 2 ohms
- Min. Impedance Bridged: 4 ohms
- THD @ Rated RMS Power: 0.05%
- Speaker Level Inputs: No
- Amp Preamp Outputs: No
- Built-in Crossover: HP (50-500Hz), LP (30-500Hz), Sub Sonic (60-200Hz)
- Bass Boost: 0 - 18 dB
- Signal-to-Noise Ratio: 96 dB
- Fan Cooled: No
- Fuse Rating: 30A x 2
- Bass EQ Control: Fully adjustable subwoofer equalization circuit providing frequency and boost ("Q") adjustment for optimum subwoofer performance. A frequency tracking subsonic filter protects woofers from potentially harmful low frequency information and maximizes output in a usable range.
- Drive Delay II: Amplifier section powers up 2 to 3 seconds after the poewr supply eliminating turn-on and off pops. The turn off process is reversed: Amplifier section turns off first, followed by the power supply.
- Flexible Input Level Control: Allows 500 mV to 4 V input sensativity.
- Trident 3-way Protection
- IDI (Intelligent Distress Indicator)
- Thermal / Short / Over Load Protection
- Stability:
- 2/4 ohms Stereo Mode
- 4 ohms Mono/Bridged Mode
- P.W.M Mosfet Power Supply
- Power and Protection Indicator
- Selectable X-Over HPF / Full / LPF
- 18db Bass Boost with Switch Sub (50Hz)
- Frequency Response: 10Hz - 30kHz
- Variable High-Pass Crossover (50-500Hz)
- Variable Low-Pass Crossover (30Hz-500Hz)
- Variable Sub Sonic Filter: (60Hz-200Hz)
- Gold Plated Terminal Strips / RCA Jacks
- Heavy Duty Heat Sink
- Adjustable Input Sensativity
- Soft Delay Remote Turn-On
- Low Level Inputs
- Phantom Channel For Powering Center Speaker or Subwoofer
- Dimensions: 24.9"L x 12.4"W x 3"H
|
